2018 Ford F-150OWNER’S GUIDE

ENGINES & FLUIDS

2018 Ford F-150 Coolant Type & Capacity

Coolant type, system capacity and service details vary with engine and equipment. Use the engine-specific Ford fluid specification rather than coolant colour alone.

Technical information reviewed: 2026-11-22

Check your configuration

Confirm the engine, trim, drivetrain, market and installed equipment before using a part number, capacity or repair procedure.

Factory-listed cooling system capacity by engine

EngineSystem capacityOriginal model-year reference
3.3L V613.6 US qt (12.86 L)2018 Ford online manual
2.7L EcoBoost15.1 US qt (approx. 14.3 L)Confirm equipment-specific details
3.5L EcoBoost15.2 US qt (14.35 L)2018 Ford online manual
5.0L V813.9 US qt (13.2 L)2018 Ford online manual
3.0L diesel13.7 US qt (13 L)2018 Ford online manual

Factory figures describe the cooling system, not necessarily the amount that drains during a routine service. Original Ford Motorcraft Orange coolant specifications must be checked alongside any current Ford-approved supersession.

What owners should know

Coolant type, system capacity and service details vary with engine and equipment. Use the engine-specific Ford fluid specification rather than coolant colour alone.

How to check your truck

Look up the coolant specification and correct dilution in the model-year Ford manual. Some production or service changes may require a VIN check.

Before ordering parts or booking service

Never remove a pressurized cooling-system cap when the engine is hot.

Factory documentation and equipment checks

The 2018 Ford F-150 factory owner manual and specification materials are the primary reference for the model year. Use the corresponding engine subsection and factory labels, then confirm any updated component number or bulletin applicability with Ford using the VIN. If an exact value is not given here, do not estimate it from another model year.

System capacity is not a drain amount

Ford system capacities describe filled cooling circuits. A drain often leaves coolant inside the engine and heater circuit, so a refill may need less than the full value. Avoid mixing incompatible coolant chemistries, follow the correct fill and air-bleeding method and inspect leaks only after the engine cools. Never remove a pressurized cap while hot.

Before working on your vehicle

Use the correct model-year manual and current service information. Stop if instructions or safety precautions are unclear, and use a qualified technician for work you cannot verify.

References and further reading

This independent guide is not endorsed by the vehicle manufacturer. Let us know if you spot an error.